If your machine install the IGNITE software you can use print_manifest , If not you can use cstm (Command line interface to the Support Tool Manager)
$ echo “selclass qualifier memory;info;wait;infolog” | /usr/sbin/cstm | grep ‘Total Configured’
Total Configured Memory : 143360 MB

addthis_url = ‘http%3A%2F%2Fsysinfo.bascomp.org%2F2007%2F08%2F06%2Fshow-memory-info-in-hp-ux%2F’;
addthis_title = ‘Show+Memory+Info+In+HP-UX’;
[…]

Popularity: 31% [?]

If your machine install the IGNITE software you can use print_manifest , If not you can use cstm (Command line interface to the Support Tool Manager)
$ echo “selclass qualifier system;info;wait;infolog” | /usr/sbin/cstm | grep “System Serial Number”
System Serial Number…….: S**xxxxxx

addthis_url = ‘http%3A%2F%2Fsysinfo.bascomp.org%2F2007%2F08%2F06%2Fshow-serial-number-system-in-hp-ux%2F’;
addthis_title = ‘Show+Serial+Number+System+In+HP-UX’;
addthis_pub […]

Popularity: 33% [?]

Before Use, Please Install (swinstall) the packaged, reach at http://hpux.connect.org.uk/hppd/hpux/Gnu/wget-1.10.2/, don’t forget about the build and run-time dependencies.
after that please add
“export http_proxy=http://server-proxy:port”
and
“export ftp_proxy=http://server-proxy:port”
in your profile
Enjoy!!

addthis_url = ‘http%3A%2F%2Fsysinfo.bascomp.org%2F2007%2F08%2F01%2Fwget-behind-proxy%2F’;
addthis_title = ‘Wget+Behind+Proxy’;
addthis_pub = ”;

Popularity: 24% [?]

Popularity: 24% [?]

Scan Tape Device, to find full path..
$ /usr/sbin/ioscan -funC tape
Class I H/W Path Driver S/W State H/W Type Description
===============================================
tape 0 0/0/11/1/0.3.0 stape CLAIMED […]

Popularity: 22% [?]

$ /usr/sbin/kmtune
Parameter Current Dyn Planned Module Version
=========================================== NSTRBLKSCHED […]

Popularity: 21% [?]

System boot process:

Power on
PDC executes CPU, Memory and other tests
PDC initialize the console to display messages
Looks for Primary boot path
It loads and executes Initial System Loader (ISL). Roll of boot ROM ends.
ISL loads the secondary system loader called “hpux”. It resides on boot area of the disk
“hpux” loads “/stand/vmunix” into memory and hands control over […]

Popularity: 23% [?]

This optional software, you must install Ignite-UX, work only in HP-UX 11.11 n later
And only root
# print_manifest | more
System Information
Your Hewlett-Packard 9000 computer has software installed and
configured as follows.
The system was created January 09, 2003, 12:10:05 SST.
It was created with Ignite-UX revision B.4.1.61.
————————————————————-
NOTE: You should retain this information for future reference.
————————————————————-
Serial number: XXXXXXXXX
Order number: […]

Popularity: 19% [?]